8R Media Change

NEW KODAK PRINTER MEDIA KIT- 8R

Cat#1090802 is a New media kit for use in Kodak 8800/8810 printers launching in the coming weeks to replace

Cat#1294966 on a stock turnover basis. *Please follow the guide*

This New kit will require changes to be made in your printers before use.

For 8800 Printers, perform the following steps:

Download and install a New color LUT (look-up table) to ensure proper color production on your prints.

You will need a blank flash drive for this download. Go to the following internet address.

Click on: Kodak Moments>Retailers>Support (on the right side) Kiosk Support> Open the dropdown menu and select

>Printer Profile and Firmware Downloads (for kiosk only) Open the second dropdown menu (select support document)>

8800 Printer profiles June 2024> Check English and the .EXE file on the right side (in red) is the download. Once

downloaded, you will need to unzip the file. Kodak uses 7-Zip to zip files. If you don’t already have it on your computer,

you can download it from this address:

Once unzipped, open the yellow folder and copy and paste the 8 files to your flash drive. Plug flash drive into a USB

port on the kiosk. Install on Kiosk: Setup>Install Software

Make certain printer is on and ready. Install takes approx. 5 minutes

For 8810 Printers, perform the following steps:

Download and install New Firmware version 6.07

Click on> Kodak Moments>Retailers>Support (on the right side) Kiosk Support> Open the dropdown menu and

Select>Printer Profile and Firmware Downloads (for kiosk only). Open the second dropdown menu (select support

document) >8810 Photo Printer V6.07 Firmware. Check English and the .EXE file on the right side (in red) is the

download. Once downloaded, you will need to unzip the file. Kodak uses 7-Zip to zip files. If you don’t already have

it on your computer, you can download it from this address:

Once unzipped, open the yellow folder and copy and paste 10 files to your flash drive. Plug flash drive into a USB port

on the kiosk. Install on the Kiosk: Setup>Install Software. Make certain printer is on and ready. Install takes

approximately 5 minutes to complete.

If you need assistance, please call 214-888-8022 Paul Crow | Southpoint Photo Supply